RCX ZMR 1804 2400KV Micro Size Integration Outrunner Brushless Motor — Mode:counter-clockwise


£9.00
Click HERE to buy from amazon.co.uk
RCX ZMR 1804 2400KV Micro Integration Outrunner Brushless Motor ZMR-XPOWER-10 for Multicopter Dear customer: The next batch of 600 unit RCX  1804 2400KV Brushless Motor will be in stock on April 27th.Shop Now! 2014.04.23 RCX Micro Size Outrunner Brushless Motor Designed for Multicopter This micro motor shipped with high performance designed for multicopter. It was manufactured by RCX but also rebranded in ZMR (so you might receive a motor with either RCX or ZMR logo). As of testing, full load of this motor demands between 6A – 8A current. So a >10A ESC is recommended, a 6A ESC might be too low if you need to drive it very hard.This is a great little motor suitable for multirotor helicopters size between 200-330mm. Description: Motor Diameter: Approx. 23.6mm Motor Shaft Diameter: 2mm Capable of 6-12~ amps of power draw Includes 1 spinner (5mm diameter) and 4 M2x5 phillips mounting screws Motor wire length = 40mm Which ESC is suitable for this motor? The testing (with 3S Li-Po, 10A ESC and both 5030 2-Blade & 3-Blade Propeller) shows that this motor demands between 7.5 – 8.5A during full load (100% Throttle). So a 10A ESC is preferred to avoid overheat if you plan to drive this motor hard. The temperature of RCX 10A ESC was only a little warm after a continuous full load after 5-6 minutes. RCX 10A G Series SimonK (better option) RCX 10A SS Series SimonK (economy option) A wholesales customer reported that the motors work beautifully which he used 4S 2200mAh 25C with 12A ESC on 5030 Props. But we have not yet tried so it is not guaranteed but you are welcome to report. Why this motor has *R and without *R? When you run your Quadcopter, you need Two Clockwise and Two Anti-Clockwise motors. So the design of this motor is that the Clockwise motor is spinning with counter-clockwise thread to av
Click HERE to buy from amazon.co.uk


Source by [author_name]

Leave a Reply